Delaware pesticide application records

What the record must contain

The elements below are required on every Delaware record. SprayDocs shows exactly these inputs for a Delaware record and will not produce the PDF while a required one is blank.

Always on the record

Required in every state, including Delaware.

• Date of the application
• Firm name, address and phone number
• Responsible commercial applicator and license number
• Name of each applicator who made the application
• Customer name and the address of the treated site
• Trade name of each product applied
• Type of site or property treated

Delaware adds

• Area treatedHow much area was treated (square feet, acres, linear feet…).
• Amount applied / total mix volumeThe total amount of mix or product applied to the site.
• Application methodHow the pesticide was applied — ground, aerial, or chemigation.
• Mix rate / concentrationThe mix rate or concentration of each product in the tank.
• Target pestThe pest or purpose each product was applied for.
• Dosage rateThe rate each product was applied at per unit of area.

Also on the SprayDocs record

Not required on every record by the Delaware rule we reviewed, but common on inspection and worth having. SprayDocs shows these inputs and blocks the PDF over only one of them: the EPA registration number on a restricted-use line, which federal law requires.

• EPA registration numberThe EPA registration number printed on each product label.
• TemperatureAir temperature at the site during the application.
• Wind direction / velocityWind direction and speed at the site during the application.
• Relative humidityRelative humidity at the site, where the label makes it a drift precaution.

Who must keep it, and for which jobs

Who: Commercial applicators.

Which jobs: Every pesticide application. The EPA registration number is explicitly required only for restricted-use products — record it anyway.

Is anything filed with the state?

No routine filing. Records are available to DDA on written request.

Copies of the record

No standing copy deadline in the rule we reviewed; copies owed on request are described under filing. Federal law still requires a customer copy within 30 days for restricted-use applications.

Restricted-use products in every state: federal law (7 U.S.C. 136i-1) requires commercial applicators to keep the record 2 years and give the customer a copy within 30 days. SprayDocs flags this on any record with a restricted-use line.

What SprayDocs checks before the PDF

Validation runs on your phone as you type. Blocking items stop the export; reminders do not.

• Every required element above is checked for a blank: 6 state-specific inputs plus the elements common to all states.
• A stop time before the start time blocks; an application date in the future is flagged.
• A product marked restricted-use requires its EPA registration number and shows the federal 2-year / 30-day reminder.
• Text that the PDF fonts cannot print (an emoji, say) is cleaned rather than allowed to blank a field.

Good to know

• Humidity is on the Delaware record because some labels make it a drift precaution; SprayDocs never blocks a record over it.

Sources

The rule text SprayDocs was built against, and where to read it. The SprayDocs research ledger is dated August 4, 2026 and each state’s configuration was checked against it as the state was built; confidence for Delaware: high.

• 3 Del. C. § 1234
• 3 Del. Admin. Code 601-14.0
• law.justia.com — https://law.justia.com/codes/delaware/title-3/chapter-12/subchapter-vii/section-1234/
• law.cornell.edu — https://www.law.cornell.edu/regulations/delaware/3-Del-Admin-Code-SS-601-14.0
• regulations.delaware.gov — https://regulations.delaware.gov/AdminCode/title3/601

Retention, deadline and filing facts on this page come from the rule cited above. Rules change; when in doubt, read the rule or ask DDA.